หน้าแรก   
|   เกี่ยวกับเรา   
เกี่ยวกับเรา
ประวัติความเป็นมา
บริษัทของเราวันนี้
ทีมงานผู้บริหาร
|   สินค้าและบริการ   
HVAC
FIRE PROTECTION
FIRE STOP
COPPER TUBE
COOLING TOWER
PUMP
VENTILATION
บริการ
ผลิตภัณฑ์ที่จำหน่าย ( ตราสินค้า )
|   สั่งซื้อออนไลน์   
ขั้นตอนการสั่งซื้อสินค้า
ตรวจสอบสินค้าทางไปรษณีย์
|   ข่าวสาร   
ข่าวสารทั่วไป
ข่าวสารความรู้
|   ผลงานที่ผ่านมา   
|   สมัครงาน   
|   ติดต่อเรา   
ติดต่อบริษัท
แจ้งเรื่องร้องเรียน
ตรวจสอบข้อร้องเรียน
 
 


AUTOMATIC BALANCING VALVE
- MAINTAINS CONSTANT FLOW INDEPENDENT OF PRESSURE CHANGES IN THE SYSTEM
- ±5% ACCURACY ON ALL SIZES, SILENT OPERATION
- NO NEED TO COMMISSIONING REDUCES TIME
- FEWER UNITS REQUIRED IN THE CIRCUIT THAN MANUAL BALANCING
- ACCURACY UNAFFECTED BY DIRT OR DEBRIS IN THE SYSTEM
- NO REQUIREMENT ON PIPE LENGTH BEFORE AND AFTER THE VALVE

AUTOMATIC BALANCING VALVE
WITH ACTUATOR MODEL "OPTIMA"

FRESE OPTIMA COMBINES AN EXTERNALLY ADJUSTABLE AUTOMATIC BALANCING VALVE, A DIFFERENTAIL PRESSURE CONTROL VALVE AND A FULL AUTHORITY MODULATING CONTROL VALVE

THEMOSTATIC CIRCULATION
FOR HOT WATER CIRCULATION CONTROL
MIXING VALVE
FOR MIXING HOT AND COLD WATER PROTECTION FROM SCALDING BY SHUT OFF THE HOT WATER SUPPLY WITHIN 4 SECONGS, IF THE COLD WATER FAILS
GATE VALVE / GLOBE VALVE
TYPE : NON-RISING, RISING STEM OR OS&Y RISING STEM
BODY STYLE : SCREWED, UNION OR BOLTED BONNET
BODY MATERIAL : BRASS, BRONZE, CAST IRON OR CAST STEEL
CONNECTION : SCREWED OR FLANGED ENDS
RATINGS : ANSI 125, 250 AND 300


Worldwide the name WILD is synonymous with the tradition of class German engineering. Our pumps and pump systems for heating, air-conditioning, cooling, water supply, fire-fighting Pump and sewage disposal are used in commercial buildings, municipal facilities, industry as well as in private home


TREMCO offers a full line of TREMstop sealants, intumescents, forming material and devices, all tested by independent laboratories. Our products meet the needs of firestop, plumbing and mechanical, electrical, dry wall and insulation contractors

With more than 400 listed systems approved for use in both the United States and Canada. TREMCO has the solution for all your firestopping needs TREMCO Fire Protection Systems Group is "Helping Contactors Win.."

AXIAL FLOW FANS

The high efficiency axial fans are used where large air volumes must be conveyed against low to medium pressures. There are two housing versions available
  • Fans mounted on a square plate with intel cone (AEQ/ADQ) are used for general ventilation, air-conditioning and cooling applications
  • Fans with round casings (AER/ADR) are used in dectecfed systems of air conditioning, cooling and drying applications
CENTRIFUGAL FANS

Design features

The high-efficiency ERS/DRS centrifugal fans have been developed for use in modern ventilation and air conditioning applications and are well suited to move air and lightly aggressive gas and vapours. The size comply with standard R20 in accordance to Din 323. The designation of size corresponds to the outside diameter of the impeller
CAR-PARK JET FANS

The overall height of the unit is 413 mm (340 mm for size 300), including mounting bracket. Due to the low construction profile, the ceiling height of the care park can be kept to a minimum
Type and Design features

Wolter root fan units are suitable for mounting on different roof types. There are two versions available:
  • Type RH with horizontal discharge
    For the exhaust of mildly polluted air
  • Type RV with vertical discharge
    For the exhaust of more heavily polluted air
AUTOMATIC BALANCING VALVE
  • MAINTAINS CONSTANT FLOW INDEPENDENT OF PRESSURE CHANGES IN THE SYSTEM
  • ±5% ACCURACY ON ALL SIZES, SILENT OPERATION
  • NO NEED TO COMMISSIONING REDUCES TIME
  • FEWER UNITS REQUIRED IN THE CIRCUIT THAN MANUAL BALANCING
  • ACCURACY UNAFFECTED BY DIRT OR DEBRIS IN THE SYSTEM
  • NO REQUIREMENT ON PIPE LENGTH BEFORE AND AFTER THE VALVE
AUTOMATIC BALANCING VALVE WITH ACTUATOR MODEL "OPTIMA"

FRESE OPTIMA COMBINES AN EXTERNALLY ADJUSTABLE AUTOMATIC BALANCING VALVE, A DIFFERENTIAL PRESSURE CONTROL VALVE AND A FULL AUTHORITY MODULATING CONTROL VALVE
THERMOSTATIC CIRCULATION

FOR HOT WATER CIRCULATION CONTROL
MIXING VALVE
  • FOR MIXING HOT AND COLD WATER
  • PROTECTION FROM SCALDING BY SHUT OFF THE HOT WATER SUPPLY WITHIN 4 SECONDS, IF THE COLD WATER FAILS
BUTTERFLY VALVE
BODY : CAST IRON, DUCTILE IRON, CAST STEEL,  STAINLESS STEEL
DISC : DUCTILE IRON, ALU-BRZ, STAINLESS STEEL
SEAT : BUNA-N, EPDM, PTFE, VITON
RATING : ANSI 125, ANSI 150, PN 16, PN 20
TYPE : WAFER OR FULL LUG
OPERATOR : HANDLE, GEAR, ELECTRIC AND PNEUMATIC ACTUATOR
BALANCING VALVE
 
BODY MATERIAL
: ORIFICE PLATE FLOW MEASUREMENT DEVICE
: FIXED ORIFICE DOUBLE REGULATING VALVE
: VARIABLE ORIFICE DOUBLE REGULATING VALVE
: COMPUTERIZED COMMISSIONING INSTRUMENT
: BRONZE FOR SIZE 112" - 2"
: DUCTILE IRON SIZE 2 1/2" - 12"
: STAINLESS STEEL FOR ORIFICE PLATE SIZE 2"-24"

GATE VALVE / GLOBE VALVE
TYPE : NON-RISING, RISING STEM OR OS&Y RISING STEM
BODY STYLE : SCREWED, UNION OR BOLTED BONNET
BODY MATERIAL : BRASS, BRONZE, CAST IRON OR CAST STEEL
CONNECTION : SCREWED OR FLANGED ENDS
RATINGS : ANSI 125, 250 AND 300
CHECK VALVE WITH SPRING LOADED
TYPE : DUO DISC OR SINGLE DISC (SWING TYPE)
BODY STYLE : WAFER OR FULL LUG
BODY MATERIAL : CAST IRON, CAST STEEL OR STAINLESS STEEL
DISC MATERIAL : ALUMINUM BRONZE, STAINLESS STEEL
SEAT MATERIAL : BUNA-N, EPDM OR VITON
SPRING MATERIAL : STAINLESS STEEL
RATINGS : ANSI 125, 150, 300, 600, 1500
STRAINER
TYPE : Y -TYPE
BODY MATERIAL : BRONZE, CAST IRON OR CAST STEEL
SCREEN MATERIAL : COPPER OR STAINLESS STEEL
CONNECTION : SCREWED OR FLANGED ENDS
RATINGS : ANSI 125, 250, PN 16, PN 20, PN 32
BALL VALVE
TYPE : FULL BORE BALL VALVE
BODY : BRASS OR BRONZE
CONNECTION : SCREWED ENDS
RATINGS : ANSI 125, PN25
OPTIONAL : EXTENSION STEM
PRESSURE GAUGE & THERMOMETER

DRY OR LIQUID FILLED, ALUMINIUM, STEEL, STAINLESS STEEL AND FIBERGLASS REINFORCED 2", 2-1/2", 4", 4-112", 6", 8" AND 12"

MERCURY IN-GLASS, BIMETAL, DIAL THERMOMETERS (VAPOR, LIQUID OR MERCURY ACTUATION), CAST ALUMINUM FOR MERCURY-IN-GLASS STAINLESS STEEL FOR BIMETAL AND THERMOMETER
2 OR 3 WAY CONTROL VALVE

HIGH CLOSE OFF ELECTRIC ZONE VALVE SE. VG4000 SERIES
ON/OFF SPRING RETURN, 220 VAC
CLOSE OFF PRESSURE : 50 PSI
2 OR 3 WAY CONTROL VALVE SE. VG1000 SERIES
ON/OFF OR PROPORTIONAL CONTROL
ELECTRIC OR SPRING RETURN, 24 VAC
CLOSE OFF PRESSURE: 13.5 BAR (197 PSI)
2 WAY CONTROL VALVE, FE. PN16 VG1000 SERIES
ON/OFF OR PROPORTIONAL CONTROL
ELECTRIC OR SPRING RETURN, 24 VAC
CLOSE OFF PRESSURE: 100 PSI
ELECTRONIC ROOM THERMOSTAT

ON/OFF WITH HI-MED-LO FAN SWITCH MODEL EA-214
ON/OFF DIGITAL WITH HI-MED-LO FAN SWITCH MODE EA-215
PROPORTIONAL, INCREMENTAL MODEL PI-01, PI-02
PROPORTIONAL OUTPUT: 0-10 VDC/2-10 VDC MODEL PI-03, PI-04
CONTROL EQUIPMENT

FLOW SWITCH FOR WATER AND AIR PRESSURE SWITCH FOR WATER AND AIR DIFF.
PRESSURE TRANSMITTER FOR AIR AQUASTAT, FIRE STAT AND WARM AIR TEMP CONTROL
PRESSURE GAUGE & THERMOMETER

DRY OR LIQUID FILLED, ALUMINIUM, STEEL, STAINLESS STEEL AND FIBERGLASS REINFORCED 2", 2-1/2", 4", 4-112", 6", 8" AND 12"

MERCURY IN-GLASS, BIMETAL, DIAL THERMOMETERS (VAPOR, LIQUID OR MERCURY ACTUATION), CAST ALUMINUM FOR MERCURY-IN-GLASS STAINLESS STEEL FOR BIMETAL AND THERMOMETER
QUARTER TURN ELECTRIC ACTUATOR
- IP 67
- 220 VAC, 1 PHASE 50 / 60 HZ
- NEMA 4 & 6
- ON / OFF OR PROPORTIONAL
AIR VALVE FOR CLEAN AND SEWAGE WATER
TYPE : AIR AND VACUUM OR PRESSURE AIR RELEASE VALVES
  : AIR AND VACUUM SEWER VALVES OR PRESSURE SEWER VALVES
BODY : CAST IRON
TRIM : STAINLESS STEEL
CONNECTION : SCREWED OR FLANGED ENDS
RATINGS : 300 PSI
BUTTERFLY VALVE
BODY : CAST IRON, DUCTILE IRON
DISE : ALU-BRZ, STAINLESS STEEL
SEAT : BUNA-N, EPDM
TYPE : WAFER OR FULL LUG
RATING : ANSI 125, PN 10, PN 16
OPERATOR : HANDLE, GEAR, ELECTRIC AND PNEUMATIC ACTUATOR
GATE VALVE / GLOBE VALVE
TYPE : NON-RISING, RISING STEM OR OS&Y RISING STEM
BODY STYLE : SCREWED OR BOLTED BONNET
BODY MATERIAL : BRASS, BRONZE, CAST IRON
CONNECTION : SCREWED OR FLANGED ENDS
RATING : PN 20 (290 PSI., W.O.G.), PN 16 (232 PSI., W.O.G.)
CHECK VALVE SWING TYPE & SPRING LOADED
TYPE : SWING TYPE & DUO-DISC
BODY STYLE : SCREWED OR WAFER
BODY MATERIAL : BRONZE, CAST IRON
DISC MATERIAL : BRONZE, BUNA-N OR EPDM
RATING : PN 20 (290 PSI., W.O.G.)a, ANSI 125, (200 PSI., W.O.G.)
STRAINER
TYPE : Y-TYPE
BODY MATERIAL : BRONZE, CAST IRON SCREEN
MATERIAL : STAINLESS STEEL
CONNECTION : SCREWED OR FLANGED ENDS
RATING : PN 20 (290 PSI., W.O.G.), PN 16 (232 PSI., W.O.G.)
BALL VALVE
TYPE : FULL BORE BALL VALVE
BODY : BRASS OR BRONZE
CONNECTION : SCREWED ENDS
RATING : PN 20 (290 PSI., W.O.G.)
BUTTERFLY VALVE
TYPE :WAFER OR FULL LUG
BODY :DUCTILE IRON
RATING :250 PSI, 300 PSI
APPROVED :UL/FM
0c59b159.zip
GATE VALVE
TYPE:OS&Y, NON RISING GATE VALVE
BODY:CAST IRON, DUCTILE IRON
RATING:175 PSI, 200 PSI, 250 PSI, 350 PSI
APPROVED:UL/FM
c724e990.zip
ALARM CHECK VALVE & ACCESSORIES
TYPE:VERTICAL & HORIZONTAL TRIM
BODY:CAST IRON, DUCTILE IRON
RATING:300 PSI
ACCESSORIES:TRIM SET, RETARD CHAMBER, ALARM GONG
APPROVED:UL/FM
8a12d463.pdf
SPRINKLER   HEAD
TYPE:PENDENT, UPRIGHT, SIDEWALL, ESFR, CONCEALED, EXTENED COVERAGE
BODY:BRONZE, BRASS, CHROME PLATED
DEFLECTOR:BRASS, COPPER
RATING:175 PSI, 250 PSI
APPROVED:UL/FM
d959a1c4.zip
BUTTERFLY VALVE
TYPE :WAFER OR FULL LUG
BODY :DUCTILE IRON
RATING :250 PSI, 300 PSI
APPROVED :UL/FM
811e46c0.pdf
BALL VALVE
TYPE:HIGH   PRESSURE
BODY:CAST BRASS, CHROME PLATED
RATING:400 PSI, 500PSI, 600 PSI
APPROVED:UL/FM
4ac83c1b.pdf
MONITORING DEVICE
TYPE:FLOW SWITCH, PRESSURE SWITCH, SUPERVISORY SWITCH
BODY:CAST ALUMINUM
RATING:250   PSI, 450 PSI
APPROVED:UL/FM
87419fcd.zip
ANGLE HOSE   VALVE
TYPE:DOUBLE FEMALE
BODY:CAST BRASS
RATING:175   PSI, 300 PSI
APPROVED:UL/FM
e6e16f10.zip
FIRE DEPARTMENT CONNECTION &
FIRE HYDRANT, ROOF MANIFOLD
TYPE:2- WAY, 3 -WAY
BODY:CAST BRASS
RATING:250 GPM, 500 GPM, 750 GPM
ACCESSORIES:QUICK COUPLING
APPROVED:UL/FM
64ea110f.zip
FIRE HOSE   RACK
TYPE:SEMI-AUTOMATIC
APPROVED:UL/FM
REGULARLY FURNISHED
- BRASS ANGLE VALVE SIZE 1   1/2", ULIFM APPROVED
- BRASS ANGLE VALVE SIZE 1   1/2", ULIFM APPROVED
- BRASS HOSE RACK NIPPLE
- FIRE HOSE SIZE 1 1/2" X 30   M, FM APPROVED
- BRASS FOG NOZZLE, UL/FM   APPROVED
1eefd6ef.pdf
FIRE HOSE RACK
TYPE:SEMI-AUTOMATIC
REGULARLY FURNISHED
- BRASS ANGLE VALVE SIZE 1 1/2"
- BRASS ANGLE VALVE SIZE 1 1/2"
- BRASS HOSE RACK NIPPLE
- FIRE HOSE SIZE 1 1/2" X 30 M
- BRASS FOG NOZZLE
37c2d593.pdf
FIRE HOSE REEL
TYPE:AUTOMATIC DOUBLE SWING
DRUM:GALVANIZED STEEL
HOSE:REINFORCED THERMOPLASTIC
RATING:220 PSI/ 15 BAR
APPROVED:BS EN 671-1 (BS 5274)
eec145b7.zip
BALANCING VALVE
TYPE : VARIABLE OR FIXED ORIFICE DOUBLE REGULATION VALVE
BODY : DZR (DEZINCIFICATLON RESISTANT)
CONNECTION : SCREWED ENDS
RATING : PN 16 (232 PSI., W.O.O.), PN 20 (290 PSI., W.O.G.)
WATER HAMMER ARRESTORS

PISTON OR BELLOW, COPPER OR STAINLESS STEEL PDI SIZE A, B, C. D, E AND F
WATER PRESSURE REDUCING VALVE

DIRECT ACTING TYPE BRONZE, BODY SCREWED OR FLANGED ENDS, RATINGS 300 PSI
CHECK VALVE
TYPE:SWING, LIFT CHECK VALVE (SILENT)
BODY:BRONZE, CAST IRON, DUCTILE IRON
RATING:175 PSI, 250 PSI, 300 PSI
APPROVED:UL/FM
53cbdb96.zip
GATE VALVE
TYPE:OS&Y, NON RISING GATE VALVE
BODY:CAST IRON, DUCTILE IRON
RATING:175 PSI, 200 PSI, 250 PSI, 350 PSI
APPROVED:UL/FM
c5d5490f.zip
GLOBE VALE
TYPE:RISING STEM
BODY:CAST IRON, BRONZE
RATING:175 PSI, 300 PSI, 500 PSI
APPROVED:UL APPROVED
7a23611d.zip
PORTABLE FIRE EXTINGUISHER
TYPEDRY CHEMICALCO2
CAPACITY10, 15, 20 LB10, 15 LB
FIRE RATING6A:10b, 6A:20B10B:C
WORKING PRESSURE195 PSI850 PSI
TEST PRESSURE500 PSI2,500 PSI
APPROVEDTIS.332-2537

TYPEFOAMHALOTRON
CAPACITY9 LITRE10, 15 LB
FIRE RATINGABABC
WORKING PRESSURE100-200 PSI195 PSI
TEST PRESSURE300 PSI500 PSI
647dfd53.zip
PORTABLE FIRE EXTINGUISHER
TYPECO2WET CHEMICAL
CAPACITY10, 15, 20 LB6 LITRE
FIRE RATING10B:CK
WORKING PRESSURE850 PSI100 PSI
APPROVEDUL LISTED
93b8ff4f.zip
MONITORING DEVICE
TYPE:FLOW SWITCH, PRESSURE SWITCH, SUPERVISORY SWITCH
BODY:CAST ALUMINUM
RATING:250   PSI, 450 PSI
APPROVED:UL/FM
201aa22e.zip
CHECK VALVE
TYPE:SWING, LIFT CHECK VALVE (SILENT)
BODY:BRONZE, CAST IRON, DUCTILE IRON
RATING:175 PSI, 250 PSI, 300 PSI
APPROVED:UL/FM
f92dae07.rar
AUTOMATIC AIR RELEASE VALVE
TYPE:SIMPLE LEVEL
BODY:CAST IRON
RATING:175 PSI, 300 PSI
APPROVED:UL/FM
dd04d407.zip
FIRE HOSE   REEL
TYPE:AUTOMATIC DOUBLE SWING
DRUM:GALVANIZED STEEL
HOSE:REINFORCED THERMOPLASTIC
RATING:220 PSI/ 15 BAR
APPROVED:BS EN 671-1 (BS 5274)
b7bf99e5.zip
FIRE HOSE   REEL
TYPE:AUTOMATIC DOUBLE SWING
DRUM:GALVANIZED STEEL
HOSE:REINFORCED THERMOPLASTIC
RATING:175 PSI/12 BAR
APPROVED:BS EN 671-1 (BS 5274)
0b131993.pdf
FIRE HOSE
TYPE:POLYESTER
HOSE:POLYESTER LINED WITH EPDM LINING
RATING:250 PSI
ACCESSORIES:QUICK COUPLING
02581d7a.pdf
SPRINKLER   HEAD
TYPE:PENDENT, UPRIGHT, SIDEWALL ESFR, CONCEALED, EXTENED COVERAGE
BODY:BRONZE, BRASS, CHROME PLATED
DEFLECTOR:BRASS, COPPER
RATING:175 PSI, 250 PSI
APPROVED:UL/FM
b4f8e537.rar
PORTABLE FIRE EXTINGUISHER
TYPEDRY CHEMICALCO2
CAPACITY10, 15, 20 LB10, 15 LB
FIRE RATING6A:10b, 6A:20B4B:C, 6B:C
WORKING PRESSURE195 PSI850 PSI
TEST PRESSURE500 PSI2,500 PSI
APPROVEDTIS.332-2537
669b4b9f.zip


TREMCO offers a full line of TREMstop sealants, intumescents, forming material and devices, all tested by independent laboratories. Our products meet the needs of firestop, plumbing and mechanical, electrical, dry wall and insulation contractors

With more than 400 listed systems approved for use in both the United States and Canada. TREMCO has the solution for all your firestopping needs TREMCO Fire Protection Systems Group is "Helping Contactors Win.."
 

Fire Resistant Mortar
Trade Name: ASTRO FM COMPOUND
BS476: Part 20 & CEN Standard N358

Up to 6 hours fire resistance for floors & walls.
Environmentally friendly.
Withstands cracking & shrinking under fire conditions.
LANTAC Building Control Approval NHBC Type Approval

A gypsum based fire resistant mortar which expands when activated by water and sets to form an excellent seal around cables, pipes and duct penetrations in walls and floors. Easily re-activated by adding extra water for up to 45 minutes after mixing. Additional services can be easily added through the mortar and resealed with further mortar. Where plastic pipes pass through the mortar, Astroflame Pipe Wraps should be used.

BS476: Part 20 & CEN Standard N358, Astroflame Fire Resistant Mortar can provide up to 6 hours fire resistance depending on depth/width and volumetric area. Available in 20kg bags
Fire Resistant Bait & Coating
Trade Name : ASTROBATT, ASTROCOAT

BS476 Part 20:1987
Up to 4 hours fire resistance Economical.
Halogen free
Reduced smoke properties Chemical / Weather resistant.
LANTAC Building Control Approval NHBC Type Approval.

Specifically designed for sealing around service penetrations in walls and floors, a single Astroflame board (60mm thick) can provide high levels of fire integrity and insulation offering up to 4 hours resistance in accordance with BS476 Part 20: 1987.

Astroflame Boards consist of a mineral fibre core coated on both sides with Astroflame Mastic, which transforms into a hard ceramic during a fire to prevent the passage of fire and smoke and the transfer of heat.

ASTROCOAT Spread Grade Mastic should be used in conjunction with ASTROBATT on cut edges or joints (see below for oder details).
BATT : 600mm x 1200mm x 60mm: 160kgm3 density.
ASTROCOAT: 15 Litre pail
Intumescent Putty
Trade Name : ASTROPUTTY

BS476: Part 20: 1987 , EN 1366-3
Up to 4 hours fire resistance , Non-setting , Easily removed and re-used , Easy to use

An easy to use, non-setting intumescent compound, which is ideal for sealing around pipes and cables in walls and floors. Can accommodate substantial movement of service penetrations and can be easily removed and re-used. Its flexibility allows it to be used around complex and irregular shapes. Offers excellent hot and cold smoke sealing properties and is not affected by fungal attack or moisture. Ideal for electrical, telecommunications and other such industries. The putty has been independently tested in accordance with BS476: Part 20: 1987 and can provide up to 4 hours fire resistance depending on depth and volume. Astroflame Putty is red in colour and supplied in handy 1 kg tubs or 20 kilo economy packs.
Intumescent Fire Pillows
Trade Name: ASTRO PILLOW

BS476: Part 20: 1987 , EN 1366-3 , Up to 4 hours fire resistance Available in 4 standard sizes , Easy to install & re-locate Removable for re-use , For wall floor & ceiling penetrations LANTAC Building Control Approval. , NHBC Type Approval. Dustproof - safe for the work environment , Protects cable trays & ducts

Manufactured from a hard wearing specially treated glass cloth filled with a mixture of mineral fibre and reactive expansion agents, which on exposure to heat from a fire will first expand and then harden to provide a complete and durable seal against the passage of fire, smoke and hot gases. Intumescent Fire Pillows can be used for creating either temporary or permanent fire barriers and are ideal for sealing cable trays and ducts that penetrate fire rated structures. The pillows have been independently tested in accordance with 85476: Part 20: 1987 and can provide up to 4 hours fire resistance. Also tested to EN1366-3, LANTAC Building Control Approval and NHBC Type Approval.

They contain no asbestos or halogens and therefore can be used in areas such as telephone exchanges, computer rooms and in areas where services are continually being modified. Up to 600mm2 4 Hour Rated, up to 850mm2 2 Hour Rated - vertical or horizontal. Available in 4 standard sizes to enable effective sealing in whatever size or shape of opening either in walls or floors
Intumescent Expansion Joint Seals
Trade Name: ASTRO EJ SEAL

BS476: Part 20 , PR EN 1336-4 , Up to 4 hours fire resistance
Weather proof & water resistant , Suits internal/external applications Cost effective to install , Performance temperature between -30 to +130'C Environmentally friendly , Available in a wide range of sizes up to 80 mm

The ASTROflame Intumescent Expansion Joint Seal is manufactured using various thickness of flame retardant open cellular foam, fire rated to achieve Class 1 and Class 0 when tested to BS476 Part 20. Expandable graphite based intumescent is factory sprayed onto both sides of the foam, forming a compressible fire resistant joint filler which is resistant to moisture attack.

The graphite based material starts to intumesce around 115 `C on the fire side of the joint whilst the fire rated foam gradually compresses allowing the expanding mass of intumescent graphite to totally seal the opening. This carbonaceous char formed by the graphite will prevent the spread of fire through the joint thus ensuring the integrity of the compartment wall/floor is maintained. Between steelwork and blockwork where deflection and movement could occur
  • In movement joints with blockwork walls and floors.
  • Top of walihead to the underside of the floor - although gaps could be uneven ASTROflame Intumescent Expansion Joint Seal is extremely compressible and should accommodate any irreguiarities.
  • Expansion Joint is an extremely versatile filler material.
Ordering Example : To specify for a gap width of of 40 mm with a 120 minute resistance order EJS40/120. When ordering please state product reference and number of metre lengths required. Supplied by the metre.
Intumescent Pipe Collars
Trade Name: ASTRO COLLAR
 
B5476: Part 20: 1987 and EN 1366-3
For use on UPVC,ABS, MDPE, HDPE and PP pipes Up to 4 hours fire resistance Surface mounted, cast or semi-cast applications LANTAC Building Control Approval. NHBC Type Approval.

Our pipe collars are manufactured from a high performance material bonded to the inside of a steel sleeve, which on exposure to heat from a fire will rapidly expand inwards to squeeze the collapsing plastic pipe until the aperture is completely sealed. Pipe collars are tested in accordance with the performance requirements of BS476: Part 20: 1987, Astro E Collar can provide 2hour fire resistance for UPVC pipes or the Astro P Collar offers 4hour resistance for UPVC, ABS, MDPE, HDPE plus PP. Also tested to EN1 366-3, LANTAC Building Control Approval and NHBC Type Approval. Our pipe collars are light and compact, easy to install, maintenance free and find uses in multi- storey office buildings, flat level developments, hospitals and hotels, and anywhere plastic soil and waste pipes pass through fire compartment walls and floors. Astroflame Pipe Collars are available in standard sizes to suit 55, 82, 110 & 160 mm diameter pipes. Other sizes available on request.
Intumescent Pipe Wraps
Trade Name : ASTROWRAP
Economical
Easy to fit
Unaffected by moisture, humidity or frost.

BS476: Part 20: 1987 EN1366-3
Up to 4 hours fire resistance. LANTAC Building Control Approval NHBC Type Approval.
Flexible strips of high performance intumescent material encapsulated in a polythene sleeve - designed for wrapping around plastic pipes that pass through masonry floors and walls. on exposure to fire the wrap expands rapidly inwards to squeeze the collapsing plastic pipe until the aperture is completely sealed. The wraps have been independently tested in accordance with BS476: Part 20: 1987 and can provide up to 4 hours fire resistance. Also tested to EN 1366-3, LANTAC Building Control Approval and NHBC Type Approval. Astroflame Pipe Wraps come available in 5 standard sizes to suit 55, 82, 110, and 160mm diameter pipes with 4 hour rating and 200 mm with 3 hour rating.
Intumescent Acoustic Mastic
Trade Name: ASTRO INTU MASTIC

Tested to BS476: Part 20: 1987 , PR EN1366-4
Up to 4 hours fire resistance , Easy to use , Long shelf life Acoustic insulation , For internal or external use LANTAC Building Control Approved NHBC Type Approval

A one part fire rated intumescent acrylic mastic designed for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures, and for maintaining their integrity when sealing around pipes and cables that penetrate them. The mastic has been independently tested in accordance with BS476: Part 20 & 22: 1987 and can provide up to 4 hours fire resistance depending on depth/width and volumetric area. PR EN1366-4, LANTAC Building Control Approval and NHBC Type Approval.

Can be used on most construction substances, although we do recommend that a small area is tested on unusual substrates. 1t can be used in most low movement joints up to 25mm wide with no slump and can be overpainted. Further details and installation instructions available on request. Acoustic performance: Weighted Sound Reduction Index (RW) of up to 57db to BSEN ISO 140-3.
Fire Rated Silicone
Trade Name : ASTRO FR Silicone
 
BS476 Part 22.
Excellent primerless adhesion to most common building materials 4 hour rating , NO halogens or isocyanates Tooling Time 5-15 minutes

Neutral cure silicone sealant joints to control the spread of fire Excellent primerless adhesion to most common building materials. Excellent movement accommodation makes it an ideal product for joints where fire resistance must be maintained. The fire retardant additives used do not contain halogens or isocyanates.

Resistant to UV radiation, moisture temperature fluctuation between 30'C and 150'C Typical Applications: Perimeter joints around fire door Pipe, cables and channel entries through walls and floors Cap beading fire protective glazing Expansion joints Connecting joints in fire walls and ceilings.
Fire Rated Economy Foam
Trade Name ASTRO FR-EC FOAM

Seals irregular gaps and expands to over 40 times the can's volume Up to Two Hour Fire rating with integrity & Insulation. BS 476 PART 20 , Self curing , Forms a semi-rigid seal LANTAC Building Control Approved NHBC Type Approval

A one component foam which expands to fill and seal gaps.

Note: This product is fire rated but is not intumescent. Fire Rated Economy Foam Has been tested to BS476 Part 20 and Class B1 Din 4102.

Main Uses For Joints/gaps in compartment walls and floors, fire & acoustic sealing around lightweight partitioning, fire rated doors and service penetrations where the integrity and insulation of firewall needs to be maintained.

Prevents the transmission of smoke, seals ground pipework, insulates against noise and excess temperatures, paintable. Tested to BS476 Part 20 specified openings for up to 160 minutes, dependent on gap size.

Ask Technical Support for further details.
LANTAC Building Control Approved and NHBC Type Approval.
...............................................................................................................................................................................................................................

...............................................................................................................................................................................................................................





BALL VALVE
TYPE:HIGH   PRESSURE
BODY:CAST BRASS, CHROME PLATED
RATING:400 PSI, 500PSI, 600 PSI
APPROVED:UL/FM
ba63fa4a.pdf
แผนกบริการ
บริษัท แมสเทค ลิ้งค์ จำกัด มีทีมงานมากกว่า 15 คน ที่พร้อมทั้งด้านความรู้ความชำนาญ ด้วยประสบการณ์มากกว่า 15 ปี( พร้อมทั้งให้บริการหลังการขาย ไม่ว่าจะเป็นข้อแนะนำในการติดตั้ง , การปรับแต่ง (Commissioning) เพื่อส่งมอบงาน หรือการปรับปรุงให้เหมาะสมกับแต่ละการใช้งาน


นอกจากบริการหลังการขายแล้ว ทาง บริษัทฯ ยังรับให้บริการกับโครงการต่างๆ ในการตรวจสอบ , ปรับปรุงแก้ไข และซ่อมบำรุง เพื่อให้ระบบของท่านทำงานได้อย่างมีประสิทธิภาพโดยมีขอบข่ายการให้บริการคือ
1. ระบบปร ับอากาศ
- วาล์วระบบ MANUAL ทุกชนิด
- Motorized Butterfly Valve
- Control valve ทั้งในแบบ 2, 3 way valve
- ปรับสมดุล ( Balance น้ำ) โดยเครื่องมือวัดผ่าน Balancing Valve และ Ultrasonic


2. ระบบประปา
- วาล์วระบบ Manual ทุกชนิด
- Pressure Reducing Valve , Relief Valve , Float Valve , Check Valve และ Pump Control Valve

3. ระบบดับเพลิง
- Alarm valve
- Hose Reel , Hose Rack รวมถึงหัวฉีดน้ำ
- Valve With Supervisory Switch

4. ระบบ Pump น้ำ
ติดต่อแผนกเซอร์วิสและฝ่ายขายแผนกเซอร์วิส
เบอร์โทรศัพท์ : 0-2931-1058
เบอร์แฟกซ์ : 0-2931-1669 , 0-2931-1046

ฝ่ายขายแผนกเซอร์วิส
คุณวัชรินทร์ สุกใส T. 08-1550-4200
สถานีไฟฟ้าภูมิภาคพังโคน จ.ว.สกลนคร
Astro Flame Fiber Coating and Cable Coating System
การไฟฟ้าภูมิภาค จ.ว.สุรินทร์
Astro Flame Fiber Coating and Cable Coating System
แฟชั่นไอซ์แลนด์
Astro Flame Fiber Coating System
 

ASTROFLAME FIRE PROTECTION
PROJECT REFERENCE
BUILDINGS AND CONSTRUCTIONS
  1. สถานีไฟฟ้าย่อย ธนบุรี
  2. สถานีไฟฟ้าย่อย คลองวัดสิงห์
  3. สถานีไฟฟ้าย่อย ภูมิภาค / หนองแค
  4. สถานีไฟฟ้าย่อย ภูมิภาค / มหาชัย
  5. สถานีไฟฟ้าย่อย ภูมิภาค / สกลนคร
  6. สถานีไฟฟ้าย่อย ภูมิภาค / อุบลราชธานี
  7. สถานีไฟฟ้าย่อย ภูมิภาค / สุรินทร์
  8. สถานีไฟฟ้าย่อย ภูมิภาค / โรจนะ 2
  9. สถานีไฟฟ้านครหลวง  / CAMBODIA
  10. สถานีไฟฟ้านครหลวง  / บางโฉลง
  11. สถานีไฟฟ้านครหลวง  / เสาระหงส์
  12. สถานีไฟฟ้านครหลวง  / เกาะกลาง
  13. สถานีไฟฟ้านครหลวง  / สามย่าน
  14. สถานีไฟฟ้านครหลวง  / หมอชิต
  15. สถานีไฟฟ้านครหลวง  / แจ้งวัฒนะ
  16. สถานีไฟฟ้านครหลวง  / เอกชัย-บางบอน
  17. สถานีไฟฟ้านครหลวง  / ธนบุรี
  18. NEW MINI-MILL  / ระยอง

PRESSURE REDUCING SERIES 127

THE OCV PRESSURE REDUCING VALVE IS USED TO REDUCE A GREATER UPSTREAM PRESSURE TO A LESSER, MORE MANAGABLE DOWNSTREAM PRESSURE, OPERATING WITHOUT REGARD TO EITHER UPSTREAM SUPPLY OR DOWNSTREAM DEMAND

PRESSURE RELIEF SERIES 108

THE OCV PRESSURE RELIEF VALVE IS USED TO MAINTAINS A CONSTANT INLET PRESSURE BY RELIEVING EXCESS HIGH PRESSURE
DIFFERENTIAL PRESSURE SERIES 110

THE OCV DIFFERENTIAL PRESSURE CONTROL VALVE IS DESIGND TO MAINTAIN A CONSTANT PRESSURE DIFFERENTIAL BETWEEN ANY TWO POINTS IN A SYSTEM WHERE THE CLOSING OF THE VALVE DIRECTLY CAUSES THE DIFFERENTIAL PRESSURE TO INCREASE
BOOSTER PUMP CONTROL VALVE SERIES 125

THE OCV SERIES 125 BOOSTER PUMP CONTROL VALVE IS FUNCTIONS TO MINIMIZE SURGES CAUSED BY THE START-UP AND SHUT DOWN OF THE PUMP, AND TO PROTECT FROM BACKFLOW IN THE EVENT OF POWER FAILURE
MODULATING CHECK VALVE SERIES 94

THE OCV SERIES 94 CHECK VALVE IS A SIMPLE ON-OFF VALVE THAT OPENS TO ALLOW FORWARD FLOW WHEN INLET PRESSURE EXCEEDS OUTLETAND CLOSES TIGHTLY TO PREVENT BACK FLOW
FLOAT CONTROL VALVE SERIES 8000

THE OCV SERIES 8000 ON-OFF TYPE AND SERIES 8100 MODULATING TYPE ARE DESIGNED TO MAINTAIN A DESIRED LEVEL IN A TANK OR RESERVOIR
PRESSURE REDUCING AND PRESSURE RELIEF VALVE UL/FM

FOR FIRE PROTECTION SYSTEM UL/LISTED, FM APPROVED
BUTTERFLY VALVE
BODY : CAST IRON, DUCTILE IRON, CAST STEEL, STAINLESS STEEL
DISC : DUCTILE IRON, ALU-BRZ, STAINLESS STEEL
SEAT : BUNA-N, EPDM, PTFE, VITON
RATING : ANSI 125, ANSI 150, PN 16, PN 20
TYPE : WAFER OR FULL LUG
OPERATOR : HANDLE, GEAR, ELECTRIC AND PNEUMATIC ACTUATOR
BALANCING VALVE
BODY MATERIAL : ORIFICE PLATE FLOW MEASUREMENT DEVICE
: FIXED ORIFICE DOUBLE REGULATING VALVE
: VARIABLE ORIFICE DOUBLE REGULATING VALVE
: COMPUTERIZED COMMISSIONING INSTRUMENT
: BRONZE FOR SIZE 112" - 2"
: DUCTILE IRON SIZE 2 1/2" - 12"
: STAINLESS STEEL FOR ORIFICE PLATE SIZE 2"-24"
BALANCING VALVE
หลักการทำงานของ Two-Way, Three-Way Valve
 
 
 
หน้าแรก     |     เกี่ยวกับเรา     |     สินค้าและบริการ     |     สั่งซื้อออนไลน์    |     ข่าวสาร     |     ผลงานที่ผ่านมา     |     สมัครงาน     |     ติดต่อเรา

บริษัท แมสเทคลิ้งค์ จำกัด
59,61,63 ซอยโชคชัย 4 ซอย 84 ถนนโชคชัย 4 แขวง ลาดพร้าว เขตลาดพร้าว กรุงเทพฯ 10230
โทร : (662) 942-1433 (14 Lines) แฟกซ์ : (662) 942-1320
อีเมลล์ : sale@massteclink.com

Copyright ©2009-2013 Masstec Link Co., Ltd. All Rights Reserved.

Visitor :